Best Kart Spindle Factory - Kart Casting Pump Support – Tongbao

Best Kart Spindle Factory - Kart Casting Pump Support – Tongbao

Short Description:


Product Detail

FAQ

Product Tags

Related Video

Feedback (2)

We know that we only thrive if we will guarantee our combined cost competiveness and high-quality advantageous at the same time for Go Kart Front Brakes, Kart Alloy Rim, Kart Rubber Mount, In case you are on the lookout for a high quality, quick delivery, very best after support and great value supplier in China for long-term small business connection, we'll be your best choice.
Best Kart Spindle Factory - Kart Casting Pump Support – Tongbao Detail:

Item No. Bore Color
TB682 28mm Black/Blue Gold/ SilverRed/ Titanium(*1)
TB684 30mm
TB686 32mm
Note:
1. Material: Aluminum 6061‐T6.
2. Finish: Color Anodized.

Blue Anodized Aluminum Support
Blue Anodized Aluminum Support
Gold Anodized Aluminum Support
Gold Anodized Aluminum Support
Orange Anodized Aluminum Support
Orange Anodized Aluminum Support
Color Anodized Aluminum Support
Color Anodized Aluminum Support

A. Heat and resurrection: the driver enters the circuit from the closed area through the exit for A warm-up lap and A formation lap after the warm-up lap in the order of designated parking Spaces. The driver is responsible for maintaining his original parking space and is prohibited from overtaking and deliberately slowing down. When the team crosses the starting line at the end of the formation circle, the starting referee waves a green flag or opens a green light to signal the start of the race.

Final: after two warm-up laps, the driver enters the circuit from the enclosed area in the order of designated parking Spaces and stops at the starting place or designated place. No refueling or external help is allowed during the laps. After the starting judge confirms the correct starting position, he signals the mechanics to run to their respective drivers. The mechanics follow the starting signal to push the karts, and the drivers start a formation circle. The drivers have the responsibility to keep their original parking space, and are forbidden to overtake and deliberately slow down.

The warm-up lap speed limit is 40 km/h in the heats and finals.

  1. In formation laps, if the driver stops on the track for some reason, he may follow the team at the end of the formation laps after starting again, but he shall not overtake and return to his original starting position. If a driver overtook, the referee waved a black flag at him and he was immediately dismissed from the race. If a driver does not stop but is far behind the rest of the team, he remains at the back of the grid and cannot regain his starting position. Violation of the rules will be punished equally.If the starting judge considers that the driver was forced to stop by the action of another, he may resume his original starting position.

If the driver’s engine stops during the formation lap, the route judge will instruct the driver to restart after all the vehicles have passed, on the premise of ensuring safety. And let the cart enter the race.

It is prohibited to use any road outside the race track to restore its original starting position.

C. Regulations of “25 beige line” in the starting area:On the track, a yellow line is drawn horizontally 25 meters from the starting line. The function of this line is: before the starting judge gives the official starting signal of the race, the racing cars on the track must go to the “25 beige line” in two rows according to the starting position. No overtaking is allowed. Only after either of the first cars in each queue has passed the yellow line are subsequent cars allowed to accelerate and overtake. Enter the official schedule.

If a driver starts the race when the first car fails to pass the “25 mile-yellow line”, the starting judge may invalidate the start and start again, and notify the race director and the arbitration committee.

Production&Packing

production-packing (6)
production-packing (5)
production-packing (4)
production-packing (3)
production-packing (2)
production-packing (1)


Product detail pictures:

Best Kart Spindle Factory - Kart Casting Pump Support – Tongbao detail pictures

Best Kart Spindle Factory - Kart Casting Pump Support – Tongbao detail pictures

Best Kart Spindle Factory - Kart Casting Pump Support – Tongbao detail pictures

Best Kart Spindle Factory - Kart Casting Pump Support – Tongbao detail pictures

Best Kart Spindle Factory - Kart Casting Pump Support – Tongbao detail pictures

Best Kart Spindle Factory - Kart Casting Pump Support – Tongbao detail pictures


Related Product Guide:

continue to improve, to ensure product quality in line with market and customer standard requirements. Our company has a quality assurance system have been established for Best Kart Spindle Factory - Kart Casting Pump Support – Tongbao, The product will supply to all over the world, such as: Croatia, Egypt, Saudi Arabia, Good quality and reasonable price have brought us stable customers and high reputation. Providing 'Quality Products, Excellent Service, Competitive Prices and Prompt Delivery', we are now looking forward to even greater cooperation with overseas customers based on mutual benefits. We will work whole-heartedly to improve our products and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.

1. Q: How to ensure your quality?

A: All of our products are made under the system ISO9001.Our QC inspects each shipment before delivery.

2. Q: Can you put down your price?

A: We always take your benefit as the top priority. Price is negotiable under different conditions, we assure you will get the most competitive price.

3. Q: How about your delivery time?

A: Generally, it will take 30-90 days after receiving your advance payment. The specific delivery time depends on your items and quantity.

4. Q: Do you offer samples?

A: of course, samples requestment is welcome!

5. Q: How about your package?

A: Usually, standard package is carton and pallet. Special package depends on your requirements.

6. Q: Can we print our logo on the product?

A: Certainly, we can make it. Please send us your logo design.

7. Q: Do you accept small orders?

A: Yes. If you are a small retailer or starting up business, we are definitely willing to grow up with you. And we are looking forward to co-work with you for a long term relationship.

8. Q: Do you provide OEM service?

A: Yes, we are OEM supplier. You can send us your drawings or samples for quotation.

9. Q: What are your payment terms?

A: We usually accept T/T, Western Union, Paypal and L/C.

  • The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
    5 Stars By Laura from Czech - 2017.09.28 18:29
    As a veteran of this industry, we can say that the company can be a leader in the industry, select them is right.
    5 Stars By Mona from Congo - 2017.08.18 18:38

    Related Products